Energy efficient solutions in traditional designs. A bath fan needn’t call attention to itself, especially when you don’t want it to overpower the design of your bath or powder room. More important, it shouldn’t call attention to itself on your electric bill. With energy efficiency for the high-traffic bathroom, the QTN130E simply does its job quietly, in every sense of the word.
- 130 CFM
- 1.5 Sones HVI Certified
- ENERGY STAR® Certified
- 6" duct connector with 6" to 4" reducer included
- Motor engineered for continuous operation
- Includes unique spacer for easy "I" joist mounting
- UL Listed for use over bathtubs or showers when connected to a GFCI protected branch circuit
- Type IC
- Fits in 2" x 8" ceiling construction; housing dimension: 11-3/8" x 10-1/2" x 7-5/8"
- Grille dimension: 14" x 13"
Buy this Bath Fan online at
NuTone Bath Fans available at The Home Depot.
Find the nearest Home Depot location in your neighborhood.
NuTone Bath & Ventilation Fans Available at The Home Depot
How long can the venting for my bath vent be? Can I use flexible duct? - Danny Lipford
What are CFMs? - Danny Lipford
Broan-NuTone Ventilation Fans Tip - Exhaust Fan Replacement Options - Danny Lipford
Range Hood & Ventilation Fans Tip - Check Terminations of Ventilation Ducts
Cleaning a Bath Exhaust Fan - Danny Lipford
Proper Ventilation Equals A Healthy Home – Danny Lipford
How To Ventilate The Whole House - Danny Lipford
Selecting Proper Ventilation Fan Size is Easy - Danny Lipford
Breathe Easy – What you need to know to ensure proper home ventilation
Whole House Mechanical Ventilation Specifier
Code compliant solutions for one and two family dwellings and townhouses up to three stories
To better serve you in determining your customers’ whole house mechanical ventilation (otherwise known as continuous ventilation) needs, Broan-NuTone has developed this on-line tool. With our CodeKey Specifier you can be confident that the products you choose will meet the latest codes and regulations. Use this tool to make your specification job easier.
Let’s get started by selecting the state where the dwelling unit will be located. CLICK HERE
|CFM @ 0.10"||130|
|Duct Size||6" or 4"|
|ENERGY STAR® certified product||Yes|
QTN130E is rated
Rated 5 out of
A snap to install,and quiet too.
Bought this fan to replace an aging relic, so easy to install and so quiet I can hardly tell it's on!
Date published: 2019-01-05
Rated 5 out of
Product is the best fan I ever had installed!
If anyone is looking for a fan that really does a great job, this is the fan to get. It does exactly what it's supposed to do. You won't even know it's there. Very quiet. Highly recommended.
Date published: 2017-11-11
Rated 2 out of
Fan is cheaply made
When I bought new fan I figured a strong brand name would be good to purchase. After it was installed a few days later it started to rattle like crazy. The cheap plastic cover was the first thing I noticed was not user friendly. I found that the fan blades were so flimsy made of cheap plastic that worped. Remember Home Depot is a platform for a new product trial. I can tell this product is just a cheap flimsy box with thin cheap plastic parts. So sorry I didn't buy a different brand from a smaller mom in pop Hardware or online. I would not recommend this to anybody.
Date published: 2017-07-07
Rated 5 out of
Great Bath Fan!
Nutone has great products! We have purchased similar products from this company in the past and have always been completely satisfied. We are currently remodeling an old home and have installed this fan in our new master bath. It is very quiet! Thanks Nutone!
Date published: 2017-04-06
Rated 4 out of
Nice and quiet and relatively easy to install. Only issue is that the grille springs that came with the unit are too short which makes it difficult to install the grille assembly.. Longer springs are available if you contact customer service.
Date published: 2017-03-10
Rated 5 out of
very quiet and effiecnt
This fan works well for our large bathroom. We don't hardly steam up the room any more. It runs very quietly. In fact if the door is closed you wouldn't even know the fan is running until opening the bath door.
Date published: 2016-04-28
Rated 5 out of
Holy cow what a difference!
I replaced an older builder model - which happened to be a NuTone. It has run about 30 minutes every day for 12 years and was still going strong! However, it just wasn't big enough for my master bath. I leave the door open when I shower and the steam was getting into the bedroom. This one not only is SO much stronger, but I honestly thought it wasn't working at first because it is so quiet! I have a dial timer switch, and the switch ticking makes more noise than this fan. Its great! The next time I'm at Home Depot I'm upgrading my guest bath fan to the same model. Wish I had done it years ago! So easy to install!
Date published: 2016-04-10
Rated 5 out of
Great Fan! Quiet and Easy to Install!
We've been using this fan for almost a year now, and it has performed as expected. The install was straight forward with easy-to-understand directions. I did manage to break a part while installing the fan, so I ordered a new one, and it came within a week. It's nice to see a company offer replacement parts that are easy to order and come quickly! Overall, I would definitely recommend this fan. In fact, I may install one in my guest bathroom!
Date published: 2015-02-09
Why do you bend the housing tabs down? Are they to be put between the dry wall and the roof joist?
They are to be placed on the underside of the joist, between the drywall and joist. They are intended to help ensure the fan is at the correct level, so it is not situated outside of the drywall or up in the ceiling/attic.
Date published: 2013-10-23
Templates needed for existing construction
None of the specs give dimensions needed for installing into existing structures. Could use a drywall template. Could also use more specific explanation of where the bottom chassis flanges should be: above or below drywall. None of the illustrations or descriptions detail where these should be after installation: above or below the drywall.
This applies to a new install as well.
I used the cardboard in the box that said do not throw away - it was perforated. I set in in place and traced it full with a sharpie - then cut it out. bottom of the housing should be flush with the surface of ceiling material. Its indicated in the instructions, just have to look closely.
Date published: 2016-10-08
Is the QTN130E fan ASHRAE 62.2 and CALGreen compliant?
Thank you for your question. The QTN130E is not ASHRAE approved. For a full list of ASHRAE approved fans visit our website and look through our online catalog. For further assistance, contact Nutone Technical Support at 888-336-6151.
Date published: 2017-09-08
I have to install the QTN130E in a down stairs restroom. Whats the most duct I can use?
the space to vent it is large enough to install an 8 inch to 10 inch duct straight thru
Thank you for your question on the model QTN130E exhaust fan. Using six inch rigid duct work you can run 65 feet straight. You need to reduce that distance by six feet for every elbow installed.
Date published: 2015-04-06
Can I remove the motor from the housing prior to installation (for a retrofit)?
Thank you for your question. You can remove the motor assembly prior to installation. For further assistance, contact Technical Support at 888-336-6151.
Date published: 2018-10-12