Vent & Heat operate together - Light separately
Figure for 9427P wiring option above shows connection to a single Dual Control switch. Can you provide instructions for connection to existing two switch junction box - switch for light and separate switch for vent & heat?
Our electrician was able to easily do this. Separate switch for heat and a a separate switch for fan with light. Works well and now 8 years old.
Date published: 2014-03-29
The fan works separate from the heat lamp can you install a timer switch on it for the fan
I have done that, the caution is the fan turns off and the heat lamps are on, unit heats up and over temp sensor kick in the fan, but do not trust this, you do not want a fire
Date published: 2019-01-06
Model 9417DN: Vent fan has stopped working. Can I replace just the fan motor without replacing the whole unit? Bulb heater works.
Can I replace the fan motor without replacing the entire unit? Bulb heater works. Fan does not.
Thank you for your question on the model 9417DN. The replacement motor is available for this unit. Please contact our Customer Service Department at 888-336-3948 for assistance. Prior to contacting customer service, please check the data label on the unit for a possible suffix (-R01) or (-R02). This will assist them in determining the required part.
Date published: 2013-10-23
Replacement motor for my 9427N heater fan.
I have a NuTone 9427N heater fan in our bath. I need to replace the vent fan motor. I can not find any info on the 9427N. I see parts for the 9427 and 9427P, but nothing for the "N". Will the motor for the other 9427s' work in my "N" model? Thanks, Don.
Thank you for your question on the 9427N dual radiant lamp heater/exhaust fan. The replacement parts are available through the “Shop for Parts” link at the top of our web site page. The exhaust fan motor would be part number 89224000 and the fan assembly complete (motor mounting bracket, motor and blower wheel) is part number 89222000. Our Customer Service can also help you with replacement parts at 888-336-3948.
Date published: 2015-11-11
Small cooling fan on 9427N
I have a 9427N heater/fan unit. The small cooling fan (#8 on the parts drawing) has failed, and the online form does not allow this part to be ordered. Is the part available?
Alternatively, can I just remove the defective fan from my 9427N and continue to use the unit safely? The 9427P does not use this fan, even though it uses the same bulbs as the 9427N. Does that mean you've determined that the fan isn't really necessary?
Thank you for your question on the model 9427N two bulb radiant heater/exhaust fan. The 9427N was designed to use the cooling fan to keep the inside of the housing cooled down. The motor for the cooling fan is no longer available and we do not recommend using the unit without it. You would need to completely remove the 9427N from the ceiling and replace it with another unit. The 9427P is designed different from the 9427N and uses the exhaust fan to cool down the inside of the housing when the heat gets too high. Please contact the Technical Service Department at 888-336-6151 for further assistance.
Date published: 2014-02-03