2 Additional Images

NGD00ZSmart Garage Door Controller

  • Overview
  • Video Links
  • Specifications
  • Reviews
  • Answers
  • Automation for your Garage

    • Wirelessly control and monitor your garage door from anywhere with the safest, most secure NuTone Smart Garage Door Controller -- Patent Pending
    • Assured safe operation with audible and visual notification prior to Open/Close of the garage door
    • Only Smart Garage Door Controller with secure barrier command class encryption eliminating unauthorized access to your home
    • Works with virtually all sectional automatic garage door openers manufactured after 1993. See Garage Door Compatibility sheet for more information
    • Installs in less than 30 minutes
    • Works with other Z-Wave devices in your home to ensure full coverage, reducing and eliminating dead spots in even the largest homes
    • Requires Z-Wave compatible gateway (sold separately)
    • Signal (frequency): 908.42MZ
    • Up to 100 feet between wireless gateway and/or the closest Z-Wave device
    • Network wide inclusion for easy setup

    Buy this smart garage door controller online now at
    Amazon.com Logo Build.com Logo

  • Video Links

    NuTone NGD00Z Smart Home Garage Door Controller Module Installation Video

    NuTone Smart Home Series – A Home Automation Solution

  • Audible Alarm45 db @ 10 feet
    ColorBlack
    Operating Temperature-4 to 122°F (-20 to 50°C)
    Power Supply120 VAC, 0.8 A
    RangeUp to 100 feet line of sight
    Signal Frequency908.42 MHz
    Strobe360 Lumens
    TypeSmart Garage Door Controller Module
  • NGD00Z is rated 5.0 out of 5 by 1.
    Rated 5 out of 5 by from Works great I bought this to use with my Vera Edge system and it works great. Easy to install, good directions and works flawlessly.
    Date published: 2016-03-31
    • y_2017, m_4, d_22, h_14
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_a742e293-1dfe-4c3e-8c66-244a02ac2feb, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_broan-nutone
  • What is the tiny switch inside the tilt sensor for?

    on the circuit board by the battery inside the tilt sensor, there is a small switch... what does that switch do?
    Asked by: Anonymous
    Thank you for your question on the model NGD00Z Smart garage door controller. The switch inside the tilt sensor is basically on ON/OFF switch. When the cover is placed on the sensor, there is a bump on the cover that will push this switch in and turn it on.
    Answered by: NuToneCustomerService
    Date published: 2016-02-08

    Does this work with Liftmaster 41DB002-2 Manufactured 3/11?

    I have it wired but doesn't seem to work. Door won't go up or down.
    Asked by: Anonymous
    Thank you for your question on the model NGD00Z Smart garage door controller. Please contact Technical Support at 855-249-0610 for assistance.
    Answered by: NuToneCustomerService
    Date published: 2016-02-08

    Is this product compatible with wink?

    Asked by: Anonymous
    Thank you for your question on the model NGD00Z smart garage door controller. As long as your wink hub supports “Secure Barrier Command Class”, it should be compatible.
    Answered by: NuToneCustomerService
    Date published: 2015-09-14

    8065 LiftMaster with z wave HomeTroller Zee S2 (Z-Wave)

    Can I use this with my Z-Wave system? I currently have a wired button and a car fob and want to add remote and door status to my Homeseer control system. I do not have a tilt sensor or any other partial open z-wave device yet, so if this is not the correct model please advise. My garage controller is an 8065 LiftMaster.
    Asked by: Anonymous
    Thank you for your question on the model NGD00Z Smart garage door controller. Please call 855-249-0610 for Technical Assistance.
    Answered by: NuToneCustomerService
    Date published: 2016-03-28

    With the NGD00Z, can we stop the garage door in the middle of the open or close sequence?

    1) I want to be able to control the NDG00Z just like any regular IR remote which we can just open the garage door half way
    Asked by: Anonymous
    Thank you for your question on the model NGD00Z Smart garage door controller. You should be able to open your garage door part way with the NGD00Z controller. Please contact Technical Service at 855-249-0610 if you need further assistance.
    Answered by: NuToneCustomerService
    Date published: 2016-10-06
    • y_2017, m_4, d_22, h_17CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_23
    • loc_en_US, sid_a742e293-1dfe-4c3e-8c66-244a02ac2feb, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan-nutone