9093WHHeater/Fan/Light/Nightlight, 1500W Heater, 70 CFM; Ventilation Fans

  • Overview
  • Specifications
  • Reviews
  • Answers
  • You don’t need to heat the entire house to have a comfortable bathroom first thing in the morning. And it simply doesn’t make sense to wait for your central heating system to do what NUTONE can do instantly. This Heater/Fan/Lighting combination provides powerful heating and ventilation at the touch of a switch.

    • 1500W heating element and 70CFM ventilation fan provides optimum performance in bathrooms up to 100 square feet, so you can have a touch of heat just when you need it
    • Bright 100W incandescent lighting provides clean, even light for pleasant surroundings and enough light to focus on the details
    • 7-watt nightlight provides a soft glow to light your bath during those nighttime visits
    • White enamel grille is a suitable match for any décor, no matter how many times you change the paint color
    • 3.5 Sone sound level
    • Four-function wall switch included so you have the right switch to control all functions right out of the box
  • Bathrooms up to (X) Square Feet65
    Ceiling InstallationYes
    CFM @ 0.10"70
    CFM @ 0.25"N/A
    cUL ListedNo
    Duct DirectionHorizontal
    Duct Size4"
    ENERGY STAR® certified productNo
    ENERGY STAR® Most Efficient 2018No
    Globe ColorN/A
    Grille Diameter15-3/8"
    Grille FinishWhite Enamel
    Grille LengthN/A
    Grille WidthN/A
    Heater Wattage1500
    Housing Dimension LxWxH13-1/4" x 7-1/2"
    Housing Height7-1/2"
    Housing LengthN/A
    Housing Width13-1/4"
    Humidity SensingNo
    HVI CertifiedYes
    Light Bulb Quantity1
    Light Bulb Wattage100
    Light Bulbs IncludedNo
    Lighting TypeIncandescent
    Minimum construction space required2" x 8"
    Motion SensingNo
    Motor engineered for continuous operationNo
    Product Weight (Pounds)17
    Project PackNo
    Rated AmpsN/A
    Rated Sones3.5
    Rated Sones - VerticalN/A
    Rated WattsN/A
    Sones 6" to 4" reducerN/A
    UL Listed for use over bathtubs or showers when connected to a GFCI circuitNo
    Wall InstallationNo
    Warranty1 Year
    Watts @ 0.1"N/A
    Watts @ 0.1" (Max CFM)N/A
    Watts @ 0.25"N/A
  • 9093WH is rated 4.2 out of 5 by 43.
    Rated 2 out of 5 by from Jury is still out. Take it or leave it. This one works so far but I hold my breath every time I turn it on because this model is relatively unreliable. If you hadn't cornered the market, I'm sure I would have looked elsewhere but as it is, this model fits the hole. Why didn't you ask my opinion of the last 3? The first one worked for 3 years before the heater needed to be replaced twice and the heat sensor 3X. The second one's heater burned out immediately and the replacement sensor was never put in because the fan shaft was so bent, it would have rattled it into failure in no time. I called about this one on the day of installation and you were not willing to do any thing. The third one roared and the heater quit inside of year. Very little usage, too. You get a D.
    Date published: 2018-06-06
    Rated 5 out of 5 by from Great product I have owned the 9093 model for about 34-35 years. I installed it when we bought our house. It has had several motors for the heat function due to lots of use. Just replaced the heat Assy. Because the over temp. Sensor went bad. The heat coil was still good. I kept the heat assy box because the heat coil was still good. These are excellent fans And the company has been great about getting parts. If you are the least bit handy you can repair these fans and never replace the whole unit. When replacing the motors I have filed a flat spot on the shaft to secure the fan cage so it stays secure. You won’t go wrong with this company.
    Date published: 2018-05-04
    Rated 3 out of 5 by from Heat fan is not going to hold up I have had these combo units in two bathrooms for years. The previous ones had a lot of mileage so motor and bearing slack (and resultant noise) is expected. However , i replaced one in my master bath with a new one two years ago and i am already getting bearing noise, faint but i know what it means. The noise will get progressively worse over time. The bushings on the motors just don't hold up over time. Of course they last the year that its warranted. Thats amazing isnt it. So, do your homework and compare price versus quality and warranties. These are average units in quality. Disappointed that i'm getting fan noise in just two years.
    Date published: 2017-11-22
    Rated 4 out of 5 by from Replaced a 9091 with a new 9093 - many issues Those of you who are buying a 9093WH to replace a 35 year old 9091 unit, be aware of the changes between those models. While the housing is the same diameter and height - most everything is in a different location. Specifically, the AC power entry is about 30 degrees rotated clockwise from the old location (tough change if you use conduit), The heater discharge is 180 degrees from the former location. The housing is different inside and must be replaced with the 9093 housing. You will need to run one more wire for the night light. The exhaust vent lined up perfectly. I'm having a problem with one of the 4 switches - believe I need to get a replacement under warranty. Having said all that - it looks good, runs good, vents good, heats good - all the things it's supposed to do.
    Date published: 2017-01-24
    Rated 4 out of 5 by from Many features but loud This vent/heater/light/night light combo unit does it all. Had to run an extra 15 amp line for the heater & had to cut out & replace single switch outlet with a dual switch outlet box to accommodate the quad switches(over & under). Unit works great except for the fact that it rumbles quite loudly. This was very well mounted with extra bracing but still makes a lot of noise on exhaust fan mode.
    Date published: 2016-07-20
    Rated 5 out of 5 by from Excellent! We had a Nutone bathroom exhaust fan that had been used a lot in the past 20 years. We wanted to replace it with one that would fit in the same space. The replacement fan fit right in and is working really well, and it even runs quieter than the old one.
    Date published: 2016-07-20
    Rated 5 out of 5 by from Great for a small bathroom The bathroom is a full bath with a washer and dryer behind folding doors. This exhaust fan is able to ventilate the area very well. The heater is good. The lights are useful. The unit would be fine for any bathroom, but really fits the needs of a relatively small area. This was a replacement for an older one that finally quit after about 16 years. I wish the sound level was quieter, but this is acceptable.
    Date published: 2016-04-28
    Rated 2 out of 5 by from Cosmetic issues and noise This fan is noisier than other reviews suggest, and, a major flaw in my opinion, when either the night light or the main light are turned on, all of the internal mechanical parts of the fan are clearly visible. I've never seen this in other vent fans. The grill is open and airy, as it should be, but the internal blowers and heater coil are totally visible when the lights are on. Hideous in a high-end bathroom. Ok for a construction trailer bathroom, I guess. I wish I had known this but NuTone is very careful to show a picture with a BLACK internal area, which it is not.
    Date published: 2016-01-02
    • y_2018, m_6, d_19, h_18
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_43
    • loc_en_US, sid_94825119-2ac2-4332-ad48-26867766d73f, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_broan-nutone

    Asked by: MRLUCKY
    I can't find 9093CH available anywhere. Please consider bringing it back. How can we be sure the white won't discolor? Is it warrantied against yellowing?
    Answered by: OldHouseLUVR
    Date published: 2018-04-04

    How do you install a new thermal cutoff protector in the QT-9093

    Asked by: Andi
    I just did this job tonight! Disconnect the wires from the thermal cutoff protector (they just pull off; you might need to press a release button of the plastic connector). Unscrew the cutoff from the body of the heater. Put in the new one, and screw it in, but not tight. Adjust the terminal bar by rotating it so that it is in the position the old one was (but leave room for a screwdriver to access both screws). Now tighten the screws of the cutoff. Push on the wires. You're done!
    Answered by: DanBOS
    Date published: 2018-04-04

    Can we use LED bulbs instead of incandescent bulbs?

    Asked by: Davis
    Most LED bulbs specify a non-fully-enclosed location. In this regard, you're golden, as this is NOT fully enclosed. The biggest issue for you will be to find a bulb small enough to fit the space. There are some new LED bulbs out that are compact, indeed. I think you'll be OK with one of those.
    Answered by: DanBOS
    Date published: 2016-04-16

    Can I replace a 9091 with a 9093WH without replacing the 9091 housing and electrical connection?

    Asked by: Rabbit
    No - be aware of the differences. First, the power entry is rotated about 30 degrees clockwise from the 9091, so if you use conduit that is a problem. If you use flexible wiring, it's probably ok. Also, the heat comes out 180 degrees from the 9091 location. You have to run one additional wire for the night light. The exhaust vent will line up in the same place, and securing the housing will use whatever you had before. I had the rotary switch, and the 9093 has 4 separate switches. The 9093 has two motors - one for vent and one for heat - no solenoid or linkage to redirect the flow of air from the single motor of the 9091.
    Answered by: Don71
    Date published: 2017-07-29

    Hi, is it possible to add a thermostat on the circuit of the heater to stop it automatically when a temperature is reached? Is tgrre a wire schematic?

    Asked by: O
    The heater assy. Already has a temp sensor installed. It turns off the heat function when temp reached. The heater then turns on/off while the fan continues to run. I just replaced my heat assy. Because the sensor was not listed in parts had to get the heat assy. Hope this helps.
    Answered by: Bill74
    Date published: 2018-05-05
    • y_2018, m_6, d_19, h_18CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_123
    • loc_en_US, sid_94825119-2ac2-4332-ad48-26867766d73f, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan-nutone