PB27LBRLighted Flat Pushbutton, 1-1/2w x 3-1/2h in Oil-Rubbed Bronze

  • Overview
  • Specifications
  • Reviews
  • Answers
  • NuTone provides a wide selection of Pushbutton Doorbells and this one is no exception! This doorbell features a quality pushbutton with a U.V. Inhibitor touch pad surface that won’t yellow in the sun and non-stick action for a lifetime of service. All with a design and style that reflects your personality!

    • Lighted pushbutton for visibility after dark so anyone can find the doorbell
    • Flat textured face has a very low profile design with a traditional feel to welcome your visitors
    • The weather resistant Oil-Rubbed Bronze finish will give you many years of dependable service
    • Surface mount design works with most typical siding or door trim installations
  • FinishOil-Rubbed Bronze
    Product Depth (inches)0.875
    Product Height (inches)3.53
    Product Width (inches)1.41
  • PB27LBR is rated 2.2 out of 5 by 5.
    Rated 3 out of 5 by from Bulb does not last forever As a doorbell button, it still works fine after almost four years in service. I recently noticed the button no longer illuminates. I'd gladly pay more for a unit with an LED lamp, which would probably last much longer.
    Date published: 2017-09-09
    Rated 1 out of 5 by from Poor Quality Material The material was in poor quality that the tidy plastic clips on the back of the button keeping it with the plastic housing broke during installation. Have to glue the parts together now to keep it from falling off. Poor design and quality of the material.
    Date published: 2016-04-02
    Rated 5 out of 5 by from Stately Elegance Impressive quality and ease of installation with a traditional appearance.
    Date published: 2014-03-17
    Rated 1 out of 5 by from Did Not Work Properly Purchased 2 of these and neither worked correctly. The chime would sound continuously. The only way to stop the chime from sounding continuously was to adjust the wiring so the light did not work. The screws are very small and difficult to work with. The assembly comes apart very easily as it is being installed. I also did not like having the Nutone name on the pushbutton.
    Date published: 2014-01-25
    Rated 1 out of 5 by from Finish All Wrong The Oil Rubbed Bronze finish is shiny and almost looks like shiny nickel. It doesn't match other Oil Rubbed Bronze items.
    Date published: 2011-04-11
    • y_2017, m_11, d_22, h_21
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_5
    • loc_en_US, sid_8cb2be5c-b9b6-4f93-a485-4a42ffb6dbbd, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_broan-nutone
  • Light out, chime does not work

    I just installed two of these purchased new. On one, the light does not work, but the chime does. On the other, the light works, but the chime does not. Do I need to reinstall, or are there two separate issues going on? These are replacing wired/surface mount doorbell buttons of the same size.
    Asked by: talba
    Thank you for your question on the model PB19LGL door chime push button. Please contact the Technical Service Department at 888-336-6151 for assistance.
    Answered by: NuToneCustomerService
    Date published: 2013-12-26

    Does this work with all 18 AWG wired door bells?

    Pella installed new door, likewise old button was thrown away, before anyone checked to see if new button would work. It doesn't and they don't want to be bothered by it. I have researched some and see that it possibly needed to have a diod to connect the two screws/wires. I need a door bell. Can you help me?
    Asked by: TG
    Thank you for your question on the model PB15LBR door chime push button. This button should work on all door chimes that are powered with a 16 volt transformer. Depending on the model of the door chime itself, you may need a diode across the push button to get it to work properly. A simple check would be to push the button as you normally would and if the tune sequence stops short of play in its entirety, a diode would most likely be required.
    Answered by: NuToneCustomerService
    Date published: 2013-10-23

    What kind of light is in the PB7LSN? Is it LED or Incandesent?

    Asked by: cj
    Unless it has changed since I installed one in 2013, it is incandescent. The bulb burned out in 2017.
    Answered by: PDraver
    Date published: 2017-09-09

    Does door bell include a transformer? If not what do I buy with it?

    Does door bell include a transformer? If not what do I buy with it?
    Asked by: Door bell info
    Thank you for your question on door chimes. Although some chimes do come as a kit, with most of the door chimes you would need to purchase the transformer and push button separately. The transformer would be a 16 volt AC transformer that is rated for at least 10 voltamps (watts). Please contact the Technical Service Department at 888-336-6151 if you need further assistance.
    Answered by: NuToneCustomerService
    Date published: 2016-08-22

    Mounting hole distance?

    What is the distance between the mounting holes on the PB27LBR pushbutton?
    Asked by: Boots
    There is 3" between the mounting screws.
    Answered by: NuToneCustomerService
    Date published: 2013-10-23
    • y_2017, m_11, d_22, h_21CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_58
    • loc_en_US, sid_8cb2be5c-b9b6-4f93-a485-4a42ffb6dbbd, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan-nutone