PB49LPBLighted Flat Pushbutton, 1-1/8w x 6h in Polished Brass
DISCONTINUED

  • Overview
  • Specifications
  • Reviews
  • Answers
  • NuTone provides a wide selection of Pushbutton Doorbells and this one is no exception! This doorbell features a quality pushbutton with a U.V. Inhibitor touch pad surface that won’t yellow in the sun and non-stick action for a lifetime of service. All with a design and style that reflects your personality!

    • Lighted pushbutton for visibility after dark so anyone can find the doorbell
    • Slender, elongated shape has an elegant presence to welcome your visitors
    • The weather resistant Polished Brass finish will give you many years of dependable service
    • A surface mount design that works with most typical siding or door trim installations, including brick molding for flexible installation choices
  • FinishPolished Brass
    Product Depth (inches)1
    Product Height (inches)6.091
    Product Width (inches)1.126
  • PB49LPB is rated 3.3 out of 5 by 6.
    Rated 3 out of 5 by from Bulb does not last forever As a doorbell button, it still works fine after almost four years in service. I recently noticed the button no longer illuminates. I'd gladly pay more for a unit with an LED lamp, which would probably last much longer.
    Date published: 2017-09-09
    Rated 1 out of 5 by from Poor Quality Material The material was in poor quality that the tidy plastic clips on the back of the button keeping it with the plastic housing broke during installation. Have to glue the parts together now to keep it from falling off. Poor design and quality of the material.
    Date published: 2016-04-02
    Rated 5 out of 5 by from Stately Elegance Impressive quality and ease of installation with a traditional appearance.
    Date published: 2014-03-17
    Rated 1 out of 5 by from Did Not Work Properly Purchased 2 of these and neither worked correctly. The chime would sound continuously. The only way to stop the chime from sounding continuously was to adjust the wiring so the light did not work. The screws are very small and difficult to work with. The assembly comes apart very easily as it is being installed. I also did not like having the Nutone name on the pushbutton.
    Date published: 2014-01-25
    Rated 5 out of 5 by from Great Lighted Door Bell This product is wonderful. It looks great. Just what we needed.
    Date published: 2010-11-13
    Rated 5 out of 5 by from High quality High quality, very good price, fast shipping.
    Date published: 2010-11-13
    • y_2017, m_10, d_21, h_18
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_6
    • loc_en_US, sid_8b3693de-a09d-460c-b842-38be8495b909, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_broan-nutone
  • Light out, chime does not work

    I just installed two of these purchased new. On one, the light does not work, but the chime does. On the other, the light works, but the chime does not. Do I need to reinstall, or are there two separate issues going on? These are replacing wired/surface mount doorbell buttons of the same size.
    Asked by: talba
    Thank you for your question on the model PB19LGL door chime push button. Please contact the Technical Service Department at 888-336-6151 for assistance.
    Answered by: NuToneCustomerService
    Date published: 2013-12-26

    Does this work with all 18 AWG wired door bells?

    Pella installed new door, likewise old button was thrown away, before anyone checked to see if new button would work. It doesn't and they don't want to be bothered by it. I have researched some and see that it possibly needed to have a diod to connect the two screws/wires. I need a door bell. Can you help me?
    Asked by: TG
    Thank you for your question on the model PB15LBR door chime push button. This button should work on all door chimes that are powered with a 16 volt transformer. Depending on the model of the door chime itself, you may need a diode across the push button to get it to work properly. A simple check would be to push the button as you normally would and if the tune sequence stops short of play in its entirety, a diode would most likely be required.
    Answered by: NuToneCustomerService
    Date published: 2013-10-23

    What kind of light is in the PB7LSN? Is it LED or Incandesent?

    Asked by: cj
    Unless it has changed since I installed one in 2013, it is incandescent. The bulb burned out in 2017.
    Answered by: PDraver
    Date published: 2017-09-09

    What is required diameter of the recessed hole under the button and what are the dimensions from the center of the button to the screw holes?

    Asked by: Tom
    Thank you for your question on the model PB49LPB door chime push button. The dimension from the center of the top mounting hole to the center of the push button is approximately 1-3/8”. The dimension from the center of the push button to the center of the bottom mounting screw is approximately 3”. The hole behind the PB49LPB needs to be a minimum of 5/8”.
    Answered by: NuToneCustomerService
    Date published: 2013-10-23

    Is PB18LWHCL the replacement doorbell pushbutton for an IS69WH recessed front door panel?

    Is PB18LWHCL the replacement doorbell pushbutton for an IS69WH recessed front door panel? If not, what is the part number for the replacement? Thanks.
    Asked by: Chip
    Thank you for your question on the part number PB18LWHCL door chime push button. The PB18LWHCL is the replacement for the button in the IS69WH. You can get this pushbutton through the “Shop for Parts” link at the top of our web site page. You would need to add an “S” to the part number (SPB18LWHCL). Our Customer Service can also assist you at 888-339-3948.
    Answered by: NuToneCustomerService
    Date published: 2015-03-17
    • y_2017, m_10, d_21, h_18CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_58
    • loc_en_US, sid_8b3693de-a09d-460c-b842-38be8495b909, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan-nutone