NDB300ABDoor Speakers for Intercoms, 4-3/16w x 6-5/16h x 1-3/8d, projects 1-9/16” from surface in Antique Brass

  • Overview
  • Specifications
  • Where To Buy
  • Reviews
  • Answers
  • Door speakers have a voice communications interface that mounts adjacent to an entry door. Available in a color to complement your door and entryway, the door speaker also features a lighted pushbutton – so there’s no need for an extra doorbell.

    • Two-way voice communication between the resident and visitor occurs through the unit’s built-in speaker, providing clear, on-the-spot interaction
    • Door station mounts recessed into the wall using an NRKR300D rough-in, providing you the perfect fit during installation
    • NuTone outdoor stations are weather-safe and designed to withstand rain and other elements, giving you complete confidence in the performance of the system, no matter what the weather
    • Surface frame NF300DWH provides a finished look for a complete visage
    • The NDB300 Series door speaker is for use with the NM100 and NM200 ‘Master’ stations only
  • Product Depth (inches)1.5
    Product Height (inches)6.25
    Product Width (inches)4.125
  • (22 Questions : 22 Answers)

    Product Q&A

    Ask your questions. Share your answers.

     
     
    « Back
     
     
    Has staff answer
    NDB300WH
     
    1 answer

    Is it compatible with the IMA-516 system?

    Customer avatar
    by
    Joe C
    Age: 45-54
    Gender: Male
    4 days ago
    Customer avatar
    by
    Joe C
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question. The NDB300WH should be compatible with your IMA516, however, due to the impedance difference; the volume may be slightly less. You will also need the NF300DWH retrofit frame due to the difference in size. The original door speakers were larger. If you have any questions, please contact our Technical Support group at 888-336-6151.
    2 days ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about NuToneCustomerService is loaded.
    Additional information about NuToneCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    NDB300WH
     
    1 answer

    How can I get replacement push buttons for buzzers on NuTone Entry Panel

    Customer avatar
    by
    shevytaylor
    Boston, MA, USA
    I have attached the pictures so you can see what I have, the 4 push buttons (one per floor) are worn. I need to replace them, the system itself works fine outside of these buttons.

    Thank You,

    John
    Age: 45-54
    Gender: Male
    User submitted photo
    User submitted photo
    3 weeks ago
    Customer avatar
    by
    shevytaylor
    Boston, MA, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the apartment system entrance directory. The directory in question is the model 498 compact directory and we would no longer have the push buttons for this product. Please contact the Technical Service Department at 888-336-6151 for possible assistance.
    2 weeks, 6 days ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about NuToneCustomerService is loaded.
    Additional information about NuToneCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    NDB300N
     
    1 answer

    What is the separation between the top and bottom mounting screws for this unit?

    Customer avatar
    by
    Steve
    Southern Cal
     on NDB300N
    I'd like to mount the NDB300N in the same opening as my current NuTone unit. The outer dimensions will cover the opening I currently have. The screws on my current unit are separated by 4-5/8" high.
    Age: 55-64
    Gender: Male
    1 month, 4 weeks ago
    Customer avatar
    by
    Steve
    Southern Cal
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the NDB300N intercom door station. The measurement between the mounting screws is 5-5/16 inches. If you are replacing an older NuTone recessed door station with the NDB300, there is a retrofit frame (model number NF300DWH) that will match the new door station to the currently installed rough-in frame. Please be advised that you cannot use the NDB300 door station with the older NuTone systems. The NDB300 is to be used with the NM100 and NM200 master stations only.
    1 month, 3 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about NuToneCustomerService is loaded.
    Additional information about NuToneCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    about 3 ft. I could use the old door speaker and cover up the box hole, but don't know what type of wires I need to extend the system.
    Age: Over 65
    Gender: Female
    2 months ago
    Customer avatar
    by
    Jud
    Boulder City, NV, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the radio intercom system door speakers. The correct way to extend the wires, are to rerun the wires. When you splice wires you have a good chance of introducing noise into the system. Please contact the Technical Service Department at 888-336-6151 for further assistance.
    1 month, 4 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about NuToneCustomerService is loaded.
    Additional information about NuToneCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    Has staff answer
    NDB300WH
     
    1 answer

    Need a replacement outside doorbell or replacement unit for old Nutone system

    Customer avatar
    by
    Bud
    Newport Beach, CA, USA
    I have a brown outside unit that measures about 1 3/4 deep, 4" wide and 5 1/4 wide with a doorbell on the lower right. The doorbell is malfunctioning. Can I buy an exact replacement doorbell for this unit or an exact replacement complete outside unit. This unit has a two way speaker and a doorbell. The inside unit ( off white) also controls the electric gate unlock. Please advise what is available. Thank you.
    Age: Over 65
    Gender: Male
    2 months, 3 weeks ago
    Customer avatar
    by
    Bud
    Newport Beach, CA, USA
    0points
    0out of 0found this question helpful.
    Was this helpful?helpful0unhelpful0

    Answers

    Answer: 
    Thank you for your question on the intercom door stations. The NDB300WH will not work with an older NuTone system. If your door station has a single, round push button to ring your door chime, you can get a replacement button. It would be part number SPB18WHCL and you can purchase it through the “Shop for Parts” link at the top of our web site page. Please contact the Technical Service Department at 888-336-6151 for further assistance.
    2 months, 2 weeks ago
    Customer avatar
    by
    Read all my Q&A
     
    Please wait while more information about NuToneCustomerService is loaded.
    Additional information about NuToneCustomerService could not be loaded.
    0points
    0out of 0found this answer helpful.
    Was this helpful?helpful0unhelpful0
    2 next>>
    2 next>>