NFS20ZSmart Fixture Control

  • Overview
  • Video Links
  • Specifications
  • Reviews
  • Answers
    • Operate and control virtually any electrical device or appliance from anywhere without the expense and hassle of running new wiring
    • No one makes installing and remotely controlling smart ceiling fans easier with Z-Wave
    • Perfect for (Commercial & Residential Lighting | Dry-Contact Relays | Bathroom Ventilation Fans | Pool Pumps | Water Heaters | Ceiling fans | or In-Ceiling lighting) most all household conveniences
    • Mounts in an electrical box
    • Maximum Load:
      • Isolated Contacts 20 amps G.P., 277VAC
        Motor: 1 H.P., 120/240 VAC
        Incandescent 960 Watts
    • Works with other Z-Wave devices in your home to ensure full coverage, reducing and eliminating dead spots in even the largest homes
    • Requires Z-Wave compatible gateway (sold separately)
    • Signal (frequency): 908.42MZ
    • Up to 100 feet between wireless gateway and/or the closest Z-Wave device
    • Network wide inclusion for easy setup

    Buy this home lighting product online now at Logo Logo

  • Video Links

    NuTone NFS20Z Smart Fixture Control Installation Video

    NuTone Smart Home Series – A Home Automation Solution

  • ColorWhite
    IncandescentTV8 (Tungsten), 120/240 VAC
    Maximum LoadIsolated Contacts: 20 amps G.P. maximum, 277VAC, 10FLA, 60LRA,250VAC
    Power Supply120 VAC, 50/60 Hz
    RangeUp to 100 feet line of sight
    Signal Frequency908.42 MHz
    TypeSmart Lighting Fixture Mounted Control
  • Can this work as toggle switch SPDT or DPDT

    I have a 2 way water valve. I currently use a single pole double throw to open the valve and close it? If yes can you send instructions please. Thanks
    Asked by: max
    Unfortunately the NFS20 is a single pull single throw device and would not work in this situation.
    Answered by: zandersen
    Date published: 2015-12-12

    Is the relay normally closed or normally open? Thanks!

    Asked by: M
    Thank you for your question regarding the NFS20Z. The relay is closed when the controlled load is turned on. When the power to the controlled load is turned off, the relay is open.
    Answered by: NuToneCustomerService
    Date published: 2017-12-18

    How can I change the LED pattern?

    Currently when the load is on, the LED turns off, and when the load is off the LED turns on. Is this because of the way I connected the blue cables? Should I swap the way I have the blue cables connected in order to change the LED pattern? I would like the pattern to be reversed, it makes more sense to have the LED on when the load is on. The User Manual states this can be done, but it doesn't say how. Currently I have the device following the wet connection diagram. Thanks
    Asked by: Marv
    Thank you for your question. The NFS20Z pattern can be changed. You will need to contact Nortek Home Automation at 855-546-3341 for further assistance.
    Answered by: NuToneCustomerService
    Date published: 2017-07-25

    Will this switch need to be reprogramed if power goes out?

    Asked by: Jim
    Thank you for your question on the model NFS20Z Smart fixture control. Of course, the system needs to be powered to work, but under normal circumstances, if you lose power the NFS20Z should continue to work once the power comes back on.
    Answered by: NuToneCustomerService
    Date published: 2017-01-31
    • y_2018, m_3, d_21, h_23CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_4
    • loc_en_US, sid_60f4d6a9-6631-4f85-a527-5b961bdbea3b, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan-nutone