Is it possible to add a duct to this hood?
I currently have this hood, but it recirculates smoke and causes my smoke detector to go off. Is it possible to create a hole to convert this into a duct hood?
Yes, I just purchased it. I don't have duct work, but on the box, it said it could be vented or non-vented.
Date published: 2013-11-23
Can the fan blade be replaced and if so, can the original retainer clip be used?
I have a Model LL6200N and need a replacement fan blade. The model closely resembling the unit I have is the RL6230BC. I donT have a part number for the item.
Thank you for your question on the model LL6200N series range hood. The part number for the fan blade is K0783000 and it is available through the “Shop for Parts” link at the top of our web site page or from the Customer Service Department at 888-336-3948. A new retainer clip will come with the new blade.
Date published: 2017-03-28
Can it be mounted rotated 90 degrees?
I have a sloped ceiling where the 24" wide stove is. Cutting a new cabinet at that slope may not be practical. Is it possible to rotate the hood so that it faces to the right of the stove instead of the front, or would that cause problems with performance? Might it also cause problems with bumping into it if mounted 24" above the stove to the bottom of the hood? I read I can mount as low as 18" above the top of the stove burners?
Thank you for your question. The RL6200 Series must be mounted beneath a cabinet. You cannot rotate the hood 90 degrees because it will not operate properly. The range hood must be mounted between 18-24 inches above the cook top.
Date published: 2017-12-27
does this hood have a 5" verticle vent?
I need an under cabinet, white range hood with a 5" verticle vent. does this unit have that?
The RL6230WH is a non ducted hood. We do have the 52000 series hood which has the 5” vertical ducting. The 30” in white is sold as 523001. We appreciate your interest in our Broan-Nutone line of product.
Date published: 2013-10-23