HPF30 (Type Xc)Non-Ducted Replacement Charcoal Filter 14.624” x 12.883” x 0.500”

  • Overview
  • Videos
  • Specifications
  • Reviews
  • Answers
  • For use with NuTone brand range hoods. NuTone filters are made from the highest quality materials to provide the longest life possible and keep your range hood operating at peak performance.

    • Dimensions: 14.624” x 12.883” x 0.500”
    • 2 filters per package
    • Fits Hood Series AHDA1, AVDF1 and AVSF1 (Service part # S97020466)
    • Filter is designed with an indicator strip that will change from dotted lines to wide solid lines as a signal to replace the filter
    • Refer to the Installation Guide provided with your range hood or see the FAQ section on this site for proper filter maintenance and warranty
  • Cleaning a Range Hood Filter – Danny Lipford

    Is there any regular maintenance needed on my range hood? - Danny Lipford

  • Dimensions14.624” x 12.883” x 0.500”
    Dishwasher Safe FiltersNo
    Filter TypeNon-Ducted Replacement Grease Filter
  • Filter not available and discontinued?

    I just bought a Nutone Mantra Range Hood. Home Depot was out of stock on the filters when I bought the range hood. I installed the hood and then went on line to buy the filters when I got home. I needed S97020466. Home Depot says they can be ordered for 29.97 a piece?? I spend hours trying to find filters at a cheaper price. One sites says these have been discontinued by the manufacture and are no longer available. Is the price so high because they have been discontinued? I would never have bought this range hood if I knew filters were so hard to get for it and so expensive. Home Depot should have said the range hood and or filters have been discontinued. That is over 60.00 for the needed filters so I can use the range hood.
    Asked by: Raccoon
    Thank you for your question on the Mantra range hood. The filters are available and have not been discontinued. Pricing for these filters can vary between distributors and not all distributors will stock them. Doing an internet search for the filter part number should give you a variety of sources and prices for these filters.
    Answered by: NuToneCustomerService
    Date published: 2017-10-16

    Dimensions are smaller than hood mesh screen

    The dimensions for this replacement filter (14.624” x 12.883” x 0.500”) is smaller than the mesh screen that came with the hood (15 3/4 x 13 7/8 x 1/4"). Is that normal? How do you secure these filters that are smaller in the larger openings?
    Asked by: jon w
    Thank you for your question. The charcoal filter is designed to be clipped onto the backside of the aluminum mesh filter. For further assistance, contact Nutone Technical Support at 888-336-6151.
    Answered by: NuToneCustomerService
    Date published: 2017-11-20

    Filter doesn't seem to fit right.

    I have a AHDA130SS hood. The grease filters that came with it are 15 3/4 x 13 7/8". These charcoal filters are 14.6 x 12.88" and the instructions show them attached to the grease filters with the clips, well it doesn't work like that, too small. Shouldn't they be the same size?
    Asked by: vent man
    Thank you for your question. The charcoal filter is supposed to be smaller than the grease filter on be installed on top of the grease filter. For further assistance, contact Nutone Technical Support at 888-336-6151.
    Answered by: NuToneCustomerService
    Date published: 2017-11-02
    • y_2019, m_1, d_23, h_14CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_3
    • loc_en_US, sid_1e0f8fda-abc7-4629-adc2-926b59c46b0a, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan-nutone