2 Additional Images

QKN6060 CFM QuicKit Bath Fan Upgrade Kit

  • Overview
  • Video Links
  • Specifications
  • Reviews
  • Answers
  • Reduces the sound level of your existing bath fan by up to 35% with an up to 68% higher sound quality rating.* Increases air movement by up to 45% with no rewiring or new ductwork required.

    • White polymeric grille blends well with any decor
    • Torsion spring grille mounting, no tools required
    • QuicKit includes a galvanized steel motor plate is designed to accommodate a variety of economy fan models
    • Air delivery shall be no less than 60 CFM and sound level no greater than 2.5 Sones
    • All air and sound ratings are HVI Certified
    • Unit is U.L. Listed
    • For use with NuTone fan models, Nautilus fan models, and Broan fan models with housing dimensions of 7.5 in. x 7.25 in. Refer to “NuTone QuicKit Measuring Video QKN60” for instructions on how to measure the housing.

    * Installed performance compared to typical existing fans

    NuTone QKN60 QuicKit Bath Fan Upgrade Kit replaces only the models listed below if the fan housing measures 7-1/2" x 7-1/4":
    If your grille looks like this:   The fan is very likely one of these models:   Housing Dimensions:

    Broan 670, 671, 688, 689 

    Nautilus N671, N688

    670, 671, 688, 689

    N671, N688

    7-1/2"x7-1/4" only

    * 8" x 8-1/4" are not compatible



    NuTone 695, 696N 

    695, 696N
    If your current fan model is not listed above above then your next option is the new EZFit™ Series Ventilation Fan that allows you to replace the entire fan and housing from the room-side. LEARN MORE

    Buy the QKN60 QuicKit Bath Fan Upgrade Kit now online at Home Depot Logo
    NuTone Bath Fans available at The Home Depot.
    Find the nearest Home Depot location in your neighborhood.

  • Video Links

  • Ceiling InstallationYes
    CFM @ 0.10"60
    Duct SizeN/A
    Grille FinishWhite Polymeric
    Grille Length10"
    Grille Width10-1/8"
    Housing Length7-1/2"
    Housing Width7-1/4"
    HVI CertifiedYes
    Light Bulb QuantityN/A
    Light Bulb WattageN/A
    Light Bulbs IncludedNo
    Lighting TypeNo Light
    Rated Amps1.2
    Rated Sones2.5
    UL ListedYes
    Wall InstallationNo
    Warranty1 Year
  • QKN60 is rated 3.1 out of 5 by 12.
    Rated 4 out of 5 by from Quiet Installed in a small bathroom to replace a noisier older model. Very easy to both remove and install the fan(s). My only complaint is the stupid spring clips. Try as I might those clips refuse to go in easily for me. I used the new cover but you could easily opt to keep the old one.
    Date published: 2017-02-23
    Rated 1 out of 5 by from Noisy and doesn't pull air out of bathroom Purchased and had a qualified work person install. Took my first shower and the entire bath filled up with fog...so what is wrong? The fan is a little quieter than the old one but not that much...was expecting it to be much quieter. I purchased 2 but the other one is going back. Unless I get an feedback on how to make it work I am going to have it pulled out and take this one back also. Love to know how to make it do its job.
    Date published: 2017-01-22
    Rated 3 out of 5 by from It's OK by today's standards I think by today's standards, this is a pretty loud fan. I just finished installing 2 different NuTone fans: the 2.0 sone ARN80HD and this 2.5 sone QKN60 upgrade kit. Now that I know the sound difference between 2.0 vs 2.5 sones, I would recommend anybody installing a new fan should look for 2.0 sones or less. Anything greater than 2.0 sones is too loud. Having said all that, this is a very simple upgrade kit, and it works. It took me about 15 minutes to open up the package, bring in a ladder, pull out the old fan, wipe off all the dust in in the existing metal fan box, and snap in the new fan, and plug it in. I live in a very old home with fans that were really loud. This QK60N upgraded my "695-R01 N" fan. I'm happy I did the upgrade. The reduction in noise compared to the old fan is noticeable, but it's not something that would get you very excited about. My wife barely noticed the noise difference. But I definitely did. This new one is also a lower/deeper fan sound whereas the old one had a higher pitch whine. The old one was so loud I couldn't hear my smartphone audio at full blast when I'm playing music / radio in the bathroom. This one's a bit better. I would say this upgrade fan "takes the edge off" the old super annoying fan. I'll also note HomeDepot had a "QKN60" and a "QKN60s" listed on their website. I'm not sure what the difference was but I think the "s" meant it was shipping from their warehouse only. In anycase my local HomeDepot had a bunch of QKN60's in stock so I bought that from the brick-and-mortar.
    Date published: 2016-10-24
    Rated 1 out of 5 by from Don't waste your time! It's really easy to install, unfortunately getting it to work is a whole different story. It would only hum but not spin. It's going back for a refund!
    Date published: 2016-08-29
    Rated 5 out of 5 by from Great Fan I have up graded 3 fans , lower sconces, save power. I have solar power house. 28 panels.
    Date published: 2016-04-29
    Rated 3 out of 5 by from DOES not fit the 695 I'm sure it's a reasonably good product, but it Does Not fit the NuTone 695 - although the spec says it will. I just wasted couple hours of my time :-\
    Date published: 2015-12-07
    Rated 4 out of 5 by from Not a replacement without taking apart I actually took the product apart so as to use the new motor and reassemble in my original unit. I did this because it is impossible for me to find a product that will work in the space available in my home without doing major reconstruction of the space in my bathroom. The fan is more powerful, but still the same noise level, if not a bit louder, but not an issue for me.
    Date published: 2015-11-16
    Rated 5 out of 5 by from This product replaced another one This is a review update. I purchased this replacement fan for one gone bad. The motor the QKN60 is a lot quieter than the one I had before. Now they have redesigned the grille covers so the retainers for the spring clips don't break off. Well done. Now I must give this product two thumbs up.
    Date published: 2015-11-13
    • y_2017, m_3, d_29, h_13
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_12
    • loc_en_US, sid_0f95404d-4347-4d78-876b-57ff82992173, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_broan-nutone
  • This kit does not fit with my 696N, the measurments of the housing are different. Is there another kit that will work with a 696N that measures 7"X8"?

    Asked by: Anonymous
    I have discovered that this replacement will work only with 696N D-units, with the appropriate tabs and the plug cut-out in the corner. This will not fit 696N B-units with alternative tabs, a side-centered plug cut-out, and a screw that holds one side of the fan unit in place. Unfortunately none of their specifications on the Website or the packaging or the instructions mention this, although the information is stamped on the metal housing.
    Answered by: Descartes
    Date published: 2016-03-03

    Upgrade from 690NT Upgrade

    I originally upgraded my 3 fans with the 690NT upgrade kit 8 years ago. Can I upgrade again with this QKN60?
    Asked by: Anonymous
    Thank you for your question on the model QKN60 QuicKit fan upgrade kit. The 690NT is used for model 693, 695 and 696N exhaust fans that have a unit housing the measures either 7-1/2” x 7-1/4” or 8” x 7-1/4”. The QKN60 is used for model 695 and 696N that has a unit housing that measures 7-1/2” x 7-1/4”. If you have a model 695 or 696N that measures 7-1/2” x 7-1/4”, you can use the QKN60.
    Answered by: NuToneCustomerService
    Date published: 2016-04-20

    will this work for a 763 model

    Asked by: Anonymous
    Thank you for your question on the model 763 exhaust fan/light and the QKN60 QuicKit bath fan upgrade kit. The QKN60 is designed for use with the NuTone models 695 and 696N that have a housing dimension of 7-1/2” x 7-1/4”. It is not designed to work with the 763. The replacement fan assembly for the 763 is part number 97015163, the replacement grille is part number 99111380 and the light lens is part number 99111381. All of these parts are available through the “Shop for Parts” link at the top of our web site page or from the Customer Service Department at 888-336-3948.
    Answered by: NuToneCustomerService
    Date published: 2016-09-26

    Is the QKN60 compatible with the Nutone 741SNNT-A?

    Asked by: Anonymous
    Thank you for your question regarding the QKN60. This unit is not compatible with the 741SNNT. If you need assistance identifying replacement parts for the 741SNNT, please call Customer Service at 1-888-336-3948.
    Answered by: NuToneCustomerService
    Date published: 2016-06-24


    Will this fit into the housing of a Broan Model 688?
    Asked by: Anonymous
    Thank you for your question on the model QKN60 QuicKit bath fan upgrade kit. The Broan model 688 is one of the fans that the QKN60 is designed to work in.
    Answered by: NuToneCustomerService
    Date published: 2015-08-12
    • y_2017, m_3, d_29, h_16CST
    • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_17
    • loc_en_US, sid_0f95404d-4347-4d78-876b-57ff82992173, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan-nutone