PB15LSNLighted Flat Pushbutton, 1-1/4w x 3h in Satin Nickel

  • Overview
  • Specifications
  • Reviews
  • Answers
  • NuTone provides a wide selection of Pushbutton Doorbells and this one is no exception! This doorbell features a quality pushbutton with a U.V. Inhibitor touch pad surface that won’t yellow in the sun and non-stick action for a lifetime of service. All with a design and style that reflects your personality!

    • Lighted pushbutton for visibility after dark so anyone can find the doorbell
    • Flat, very low profile design has a contemporary feel to welcome your visitors
    • The weather resistant Satin Nickel finish will give you many years of dependable service
    • Surface mount design works with most typical siding or door trim installations
  • FinishSatin Nickel
    Product Depth (inches)0.875
    Product Height (inches)2.938
    Product Width (inches)1.25
  • PB15LSN is rated 2.5 out of 5 by 4.
    Rated 3 out of 5 by from Bulb does not last forever As a doorbell button, it still works fine after almost four years in service. I recently noticed the button no longer illuminates. I'd gladly pay more for a unit with an LED lamp, which would probably last much longer.
    Date published: 2017-09-09
    Rated 1 out of 5 by from Poor Quality Material The material was in poor quality that the tidy plastic clips on the back of the button keeping it with the plastic housing broke during installation. Have to glue the parts together now to keep it from falling off. Poor design and quality of the material.
    Date published: 2016-04-02
    Rated 5 out of 5 by from Stately Elegance Impressive quality and ease of installation with a traditional appearance.
    Date published: 2014-03-17
    Rated 1 out of 5 by from Did Not Work Properly Purchased 2 of these and neither worked correctly. The chime would sound continuously. The only way to stop the chime from sounding continuously was to adjust the wiring so the light did not work. The screws are very small and difficult to work with. The assembly comes apart very easily as it is being installed. I also did not like having the Nutone name on the pushbutton.
    Date published: 2014-01-25
    • y_2017, m_11, d_19, h_23
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_4
    • loc_en_US, sid_053b26fe-0929-48ea-9da0-b3b9b28baa3d, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_broan-nutone
  • Light out, chime does not work

    I just installed two of these purchased new. On one, the light does not work, but the chime does. On the other, the light works, but the chime does not. Do I need to reinstall, or are there two separate issues going on? These are replacing wired/surface mount doorbell buttons of the same size.
    Asked by: talba
    Thank you for your question on the model PB19LGL door chime push button. Please contact the Technical Service Department at 888-336-6151 for assistance.
    Answered by: NuToneCustomerService
    Date published: 2013-12-26

    Does this work with all 18 AWG wired door bells?

    Pella installed new door, likewise old button was thrown away, before anyone checked to see if new button would work. It doesn't and they don't want to be bothered by it. I have researched some and see that it possibly needed to have a diod to connect the two screws/wires. I need a door bell. Can you help me?
    Asked by: TG
    Thank you for your question on the model PB15LBR door chime push button. This button should work on all door chimes that are powered with a 16 volt transformer. Depending on the model of the door chime itself, you may need a diode across the push button to get it to work properly. A simple check would be to push the button as you normally would and if the tune sequence stops short of play in its entirety, a diode would most likely be required.
    Answered by: NuToneCustomerService
    Date published: 2013-10-23

    What kind of light is in the PB7LSN? Is it LED or Incandesent?

    Asked by: cj
    Unless it has changed since I installed one in 2013, it is incandescent. The bulb burned out in 2017.
    Answered by: PDraver
    Date published: 2017-09-09

    Metal or Plastic

    What is the decorative part made of, metal or plastic?
    Asked by: Kevin
    Thank you for your question on the model PB15LSN push button. The decorative part of the PB15LSN is metal.
    Answered by: NuToneCustomerService
    Date published: 2013-10-23

    Do you make an"extension box" to raise this off of the mounting surface? This would be for existing installations where the hole drilled for the wire

    through the door frame is only slightly bigger that the wire. To be clear, this question is for the PB15LSN Lighted Flat Pushbutton
    Asked by: Stormbringer
    Thank you for your question on the model PB15LSN door chime push button. This is designed to be flush mounted and would not have any sort of extension box to raise it off of the mounting surface.
    Answered by: NuToneCustomerService
    Date published: 2014-07-28
    • y_2017, m_11, d_19, h_23CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_58
    • loc_en_US, sid_053b26fe-0929-48ea-9da0-b3b9b28baa3d, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
    • clientName_broan-nutone